VIA Technologies QSM-8Q60 Installation Manual
Hide thumbs
Also See for QSM-8Q60:
- User manual (45 pages) ,
- Quick start manual (31 pages) ,
- Design manual (44 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for VIA Technologies QSM-8Q60
Summary of Contents for VIA Technologies QSM-8Q60
- Page 1 IMAGE INSTALLATION GUIDE QSM-8Q60 Linux EVK v2.0.1 1.00-08252016-145000...
- Page 2 The information and product specifications within this document are subject to change at any time, without notice and without obligation to notify any person of such change. VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any time without prior notice.
- Page 3 QSM-8Q60 Linux EVK v2.0.1 Image Installation Guide Revision History Version Date Remarks 1.00 8/18/2016 Initial release...
- Page 4 QSM-8Q60 Linux EVK v2.0.1 Image Installation Guide Table of Contents 1. Introduction ..........................1 1.1. Package Contents..........................1 1.2. Version Information and Supported Features ................1 2. Image Development ........................2 2.1. Booting from a Micro SD Card ....................2...
- Page 5 1. Introduction This Image Installation Guide explains how to boot the Linux EVK system image on the QSM-8Q60 and QSMDB2 carrier board in order to begin evaluating the platform. The QSM-8Q60 Linux EVK v2.0.1 is developed based on the NXP fsl-yocto- 3.14.28_1.0.0 (Yocto 1.7 Dizzy) and enables the hardware features of the QSM-8Q60...
- Page 6 Important: Make sure you are writing to the correct device or the host system environment could be damaged. $ sudo dd if=via-image-gui-imx6qsm8q60.sdcard of=/dev/<device name> bs=1M conv=fsync Next, on the QSM-8Q60, set the Micro SD/SPI boot select jumper (J11) to the Micro SD position as shown below. Micro SD/SPI boot select jumper diagram Insert the prepared Micro SD card into the QSM-8Q60, connect the HDMI display to the QSMDB2 carrier board, and power on the device to initiate the boot process.
Need help?
Do you have a question about the QSM-8Q60 and is the answer not in the manual?
Questions and answers