Furniture of America CM-BN6017S Assembly Instructions

ASSEMBLY RATING

The Assembly Rating is a 5-point system that

shows the degree of effort needed in

assembling a specific product (with 1 being

easy and 5 being difficult). For some

products, two persons are recommended.

EASY

CM-BN6017S

DIFFICULT

Page 1 of 5

Tools Required for Assembly:

Allen Wrench

Phillips Screwdriver

(Included)

(Not Included)

Rev.14-06-19

Table of Contents

Need help?

Do you have a question about the CM-BN6017S and is the answer not in the manual?

Page 1 Assembly Instructions CM-BN6017S ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that Allen Wrench shows the degree of effort needed in (Included) assembling a specific product (with 1 being Phillips Screwdriver easy and 5 being difficult). For some (Not Included) products, two persons are recommended.
Page 2 Page 2 of 5...
Page 3 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Hardware List (Continued) Parts List #1 x 1 pc #D x 8 pcs Seat Flat Washer #E x 8 pcs #2 x 1 pc Lock Washer...
Page 4 #A x 8 pcs Turn right (clockwise) to tighten #H x 4 pcs Align the two brackets (#H) with the pre-drilled holes on the leg (#3). Insert 4 bolts (#A) into the bracket (#H) using the Allen wrench (#I) to lock with the leg (#3).
Page 5 Carefully place the seat (#1) facing down on a protected surface. Align the brackets (#H) assembled onto the legs (#3) with the pre-drilled holes on the bottom of the seat (#1). III. Prepare 8 bolt assemblies by inserting FIRST the lock washer (#E) onto the bolt (#B) and then the flat washer (#D) onto the SAME bolt (#B), in that order.