Furniture of America CM-BN6681 Assembly Instructions

Table of Contents

Download this manual

Assembly Instructions

CM-BN6681

ASSEMBLY RATING

The Assembly Rating is a 5-point system that

shows the degree of effort needed in

Allen Wrench

assembling a specific product (with 1 being

(Included)

easy and 5 being difficult). For some

products, two persons are recommended.

Phillips Screwdriver

(Not Included)

DIFFICULT

EASY

Page 1 of 5

Rev.14-03-11

Table of Contents

Do you have a question about the CM-BN6681 and is the answer not in the manual?

Page 1 Assembly Instructions CM-BN6681 ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench assembling a specific product (with 1 being (Included) easy and 5 being difficult). For some products, two persons are recommended.
Page 2 Page 2 of 5...
Page 3 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 x 1 pc #A x 4 pcs Backrest Bolt 1/4”x2-1/2” #2 x 1 pc #B x 5 pcs Left Arm Bolt 1/4”x1-3/16”...
Page 4 Insert two wood dowels (#D) onto the backrest (#1), four Step 1 wood dowels (#D) onto the rear support rail (#5) and four wood dowels (#D) onto the front support rail (#6). #D x 10 pcs Note: Right and left is determined by standing in FRONT of the bench in its upright position.
Page 5 Align the bench cushion (#4) onto the assembled parts. Step 3 #B x 5 pcs Insert 3 bolts (#B) onto the rear support rail (#5) and using an Allen wrench (#E) to lock them down with the bench cushion (#4). Insert a bolt (#B) onto the left arm (#2) and using an Allen wrench (#E) to lock it down...