Table of Contents
Advertisement
PV will provide power to the loads first. If it's not sufficient, battery will provide back-up
power to the loads. If the battery reached LBCO, AC input will provide power to the loads.
Load Supply Source (PV is unavailable): Loads will be supplied in one of the following options:
st
nd
1. 1
AC then 2
battery will supply power to loads as back-up.
st
2. 1
Battery then 2
AC will power the loads.
NOTE: This option becomes ineffective during AC charging time, and the priority will default to
st
AC 1
and Battery 2
Violate the terms of the Warranty.
12.7– Interface
The operation LCD panel, shown in the chart below, includes four touchable function keys and an LCD display
to indicate the operating status and input/output power information.
© SIMPLIPHI POWER
Battery (Default): AC will provide power to the loads first, if AC is not available
nd
AC: Battery will provide power to the loads first. If battery voltage is low, the
nd
order. Overriding this setting will cause damage to the batteries and will
| 35 |
LCD Display
Touchable Function Keys
REV2022007071630
Advertisement
Table of Contents
