Related Manuals for Briggs & Stratton EnergyTrak
Summary of Contents for Briggs & Stratton EnergyTrak
- Page 1 C O N N E C T M O N I T O R C O N T R O L EnergyTrak ™ Install and User Manual for Pros...
-
Page 2: Table Of Contents
SimpliPHI ESS Commissioning with EnergyTrak _________________________ 12 Warranty Statement The following abbreviated guidelines do NOT encompass all EnergyTrak Warranty details. Failure to Important Safety Instructions adhere to the Warranty and Installation Manual requirements will violate the terms of the Warranty. -
Page 3: Energy Solutions Product Compatibility
(RECOMMENDED), or • WiFi network connection with a strong signal at the location of the EnergyTrak Gateway. All network equipment associated with connecting the EnergyTrak Gateway to the Internet (i.e., router, modem, network switches) should be powered from the critical loads panel so that these systems maintain operation in all power scenarios. -
Page 4: Getting Started With Energytrak For Pros
Wires (two (2) wires; 18 AWG)2 The overall length of all ethernet cables used across the entire battery bank CAN bus cannot exceed 100 meters; this includes the ethernet cable (GW-8) between the EnergyTrak Gateway and the Battery it is connected to, and all ethernet cables running from battery to battery (not pictured here) - Page 5 13. Connect the red wire on GW-4 to the +Vin port on the DC-DC power supply unit. set to help them focus on what needs to get done: 14. Connect one end of GW-11 to the ETHERNET port on the EnergyTrak Gateway and the other end to an open port on the site’s Create new sites •...
- Page 6 Site Fleet Tracking Pro users can monitor the status of their customer sites from the Sites screen in the EnergyTrak app. Each site has a status that indicates its current operating state, including: Healthy: All systems are functional and normal...
-
Page 7: Simpliphi Ess Commissioning With Energytrak
There are several preparations and pieces Site Info of information to collect before you start The SimpliPHI ESS will be registered to a Site within EnergyTrak. To create a new site, you will need: commissioning the SimpliPHI ESS from the •... - Page 8 Start Commissioning matches its ID#, which is printed on the label of the gateway. Before you are able to commission the SimpliPHI ESS using the EnergyTrak app, you will first need If the EnergyTrak Gateway is not in the network list…...
- Page 9 SimpliPHI 6kW Inverter and SimpliPHI 4.9kWh Battery. When the Equipment details screen opens, more information related to Operating Profiles. EnergyTrak will automatically check the current version of the firmware files in the app with the version of the firmware files currently installed on the inverter and battery.
- Page 10 Operating Profile Descriptions Grid-Tied Zero Export Grid-Tied Backup Parameter Setting Parameter Setting Solar Distribution Priority Battery > Load > Grid Solar Distribution Priority Load > Battery Enable Charging Enabled Enable Charging Enabled Enable AC Charging Enabled Enable AC Charging Enabled Enable feed to Utility Disabled Enable feed to Utility...
- Page 11 If the EnergyTrak Gateway has already been connected to the Internet using a hardwired Ethernet To change settings which are not available in EnergyTrak, you will need to use the LCD panel on the cable connection, then this step can be skipped. Optionally, the WiFi network connection can also front of the inverter.
- Page 12 SimpliPHI ESS should be working as configured. The site should be viewable from the Sites screen in the EnergyTrak app, and the status of the site should be HEALTHY unless something needs to be addressed. Selecting the site will show the Site Dashboard with a detailed view of the current power flow through the SimpliPHI ESS.