Table of Contents
Advertisement
PARTS LIST
The kit includes the standard parts
Item
1
2
3
4
Three cruise handles are offered: two column mount models and a dash mount version.
The column models use a different interface harness than the dash mount model.
The appropriate harness will be supplied with the handle chosen at purchase time.
Part
Style
HND-1
Cut-off style
HND-2
Dash Mount
HND-3
<1980 GM turn signal replacement
(The harness 394206 could also be used with four wire GM stock turn signal levers built for cruise, page [9])
The colors will vary some on the 394207, so matching a wire color to color will not always be feasible.
See the wiring diagrams for proper connections to the cruise handles on page [8].
Pedals vary in build and operation. The pin layout must be a single row as shown in the purple pedal plug of
the 250-2766 below. If the pins are turned, or the pedal has a dual row of pins, the CRC-1000 will not function,
and the wiring and cannot be modified "to make work".
For proper pedal operation, a voltage test can be found on page [12].
Quantity
1
1
1
Main Power / Input Harness
1
Mounting
Requires cutting off original plastic of turn signal
Requires three holes drilled into dash or console
Replaces older GM turn signal with screw
Description
Cruise Control Module
Pedal Interface Harness
OBDII DLC Harness
[2]
Part Number
CRC-1000
250-2766
250-2933
250-2785
Harness
394207
394206
394207
MAN #650541:A
Advertisement
Table of Contents
