Installing The Battery - Dell Precision 7770 Service Manual

Installing the battery

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the battery and provides a visual representation of the installation procedure.
Steps
1. Align the tabs on the battery at an angle with the tab holes on the system chassis.
2. Place the battery onto its slot in the system chassis.
3. Replace the three (M2x7) screws to secure the battery to the system chassis.
Next steps
1. Install the base cover.
2. Follow the procedure in after working inside your computer.
26 Removing and installing components