Palm Rest; Removing The Palmrest - Dell Precision 7770 Service Manual
Hide thumbs
Also See for Precision 7770:
- Setup and specifications (31 pages) ,
- Connection manual (10 pages) ,
- Service manual (96 pages)
Table of Contents
Advertisement
6. Replace the three (M2x2.5) screws to secure the dummy fin to the palmrest.
Next steps
1. Install the
system
board.
2. Install the
inner
frame.
3. Install the
heat-sink for discrete
4. Install the
secondary solid-state
5. Install the
solid-state
6. Install the
WWAN
card.
7. Install the
interposer board
8. Install the
CAMM module
9. Install the battery.
10. Install the
SIM
card.
11. Install the
base
cover.
12. Follow the procedure in
Palm rest
Removing the palmrest
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
SIM
card.
4. Remove the battery.
5. Remove the
CAMM module
6. Remove the
interposer board
7. Remove the
WWAN
card.
8. Remove the
solid-state
9. Remove the
secondary solid-state
10. Remove the
heat-sink for discrete
11. Remove the
GPU
card.
12. Remove the
GPU power
13. Remove the
power-button
14. Remove the power-button.
15. Remove the speakers.
16. Remove the
inner
frame.
17. Remove the
SD card
reader.
18. Remove the
system
board.
19. Remove the
coin-cell
20. Remove the
display
assembly.
21. Remove the
power-adapter
22. Remove the
smart card
23. Remove the keyboard.
About this task
The figure below shows the palmrest after performing the pre-removal parts procedures for any palm rest replacement.
86
Removing and installing components
graphics.
drive.
drive.
module.
or
memory
module.
after working inside your
before working inside your
or
memory
module.
module.
drive.
drive.
graphics.
cable.
board.
battery.
port.
reader.
computer.
computer.
Advertisement
Table of Contents
