Can I Set The Map Layout So It Stays After I Restart Fabric Manager; Troubleshooting Fabric Manager Issues - Cisco MDS 9000 Series Troubleshooting Manual

S e n d c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Troubleshooting Fabric Manager Issues

This chapter contains some common issues you may experience while using Cisco Fabric Manager, and
provides solutions.
This chapter contains the following topics:
•
•
•
•
•
•
•
•
•
•
Can I Set the Map Layout So It Stays After I Restart Fabric
Manager?
If you have arranged the map to your liking and would like to "freeze" the map so that the objects stay
as they are even after you stop Fabric Manager and restart it again, do the following:
Step 1 Right-click on a blank space in the map. A menu is displayed.
Step 2 Select Layout -> Fix All Nodes from the menu.
OL-5183-02, Cisco MDS SAN-OS Release 1.3
Can I Set the Map Layout So It Stays After I Restart Fabric Manager?, page 7-61
Two Switches Show on my Map, But I Only Have One Switch, page 7-62
There is a Red Line Through the Switch. What's Wrong?, page 7-62
There is a Dotted Orange Line Through the Switch. What's Wrong?, page 7-62
Can I Upgrade Without Losing My Map Settings?, page 7-62
Are There Any Restrictions When Using Fabric Manager Across FCIP?, page 7-62
Running Cisco Fabric Manager with Multiple Interfaces, page 7-63
Configuring a Proxy Server, page 7-64
Clearing Topology Maps, page 7-64
Can I Use Fabric Manager in a Mixed Software Environment?, page 7-65
C H A P T E R
Cisco MDS 9000 Family Troubleshooting Guide
7
7-61