Packaging; Installation - ATCOM A2SV Series Quick Start Manual

A2SV Series Quick Start Guide

1. Packaging

In the packaging box, we can see one IP phone, one handset, one bracket, two wall-hung
brackets, one network cable, one handset cable, one USB power conversion cable and one
5V,2A power adapter.
(Note: A2SV uses 5V/1A, other models use 5V/2A)

2. Installation

2.1. Connecting port introduction
From as below picture show the connecting port and insert the standard Nano-SIM card
into the back cover way:
(Note: please don't plug in and off Nano card when the phone connected power)
2.2. Keypad introduction,
Please check the following picture:
3 / 13