Changing The Basic Set- Tings; Dishwasher-Safe Compon- Ents - Siemens EQ.500 integral Information For Use

Setting
Autom. switch-off
Water hardness
Key tones
Factory settings
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)
11.2 Changing the basic set-
tings
Press
1.
Use or
2.
sired basic setting and press
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
Use or
3.
sired selection and press
a The setting is now saved.
Use to go back.
4.
Press
5.
Selection
See options on the appli-
ance.
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Water-softening system
Key tones on
Key tones off
Full reset?
Continue: OK
Cancel: ←
⁠ .
to select the de-
to make the de-
⁠ .
to exit the menu.
2
2
12 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
⁠ .
to clean and maintain it carefully.
12.1 Dishwasher-safe com-
ponents
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some components are sensitive to
heat and may be damaged if they are
cleaned in a dishwasher.
▶
Follow the operating instructions of
the dishwasher.
▶
Only clean dishwasher-safe com-
ponents in the dishwasher.
▶
Only use programmes that do not
heat the components above
60 °C.
Cleaning and servicing en
Description
Set how long the appli-
ance should wait after
preparing the last drink
before automatically
switching itself off.
Set the appliance to the
local water hardness.
→ "Setting the water
hardness", Page 16
Switch the button tones
on or off.
Restore settings to the
factory settings.
Note: All individual set-
tings will be deleted and
reset to the factory set-
tings.
25