Basic Settings; Changing The Basic Set- Tings; Overview Of The Basic Settings - Siemens iQ700 EOX6021 FW CT9 Series Information For Use

The current software and hardware
¡
version of your appliance.
Status of any previous reset to
¡
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
14.2 Overview of the basic settings
You can find an overview of the basic settings here.
Language
Home Connect
Time
Date
Display settings
1
Depending on the appliance specifications
Home Connect assist-
ant
Display brightness
Time display
Time
14 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
14.1 Changing the basic set-
tings
Press ⁠ .
1.
The display shows the list of basic
a
settings.
Change the required basic setting.
2.
The appliance saves the basic set-
a
ting automatically.
To go back to the menu, press
3.
To exit the basic settings, press
4.
Tip: To call up brief information,
press ⁠ .
Set language.
→ "Setting up Home Connect",
Page 57
Set the current time or auto-
matically display via
Home Connect.
Set current date or display
automatically via Home Con-
nect.
Set the brightness in steps.
Switch the time display on
and off after the appliance has
been switched off.
Set the time display.
Basic settings en
59
⁠ .
⁠ .