MAINTENANCE
A\ Caution : Read this page carefully to keep your safety.
For Electric Shock Protection:
Be sure to disconnect the power cable from the socket
before conducting the following operation.
MAINTENANCE
There is high voltage used inside this unit. Never open the case.
REPLACEMENT OF FUSES
This oscilloscope will not function if the fuse has blown. If the fuse blows, determine the
;ause, and contact your dealer if the cause lies in this equipment.
If the cause was external to this equipment, remove the cause, detach the fuse holder
from the rear panel using a flatblade screwdriver, and insert a new fuse.
R e a r P a n e l
F l a t b l a d e
Fig. 18
s c r e w d r i v e r
27