TOP C A S E SURFACE
(§) Connector Cover
Used when option BP-70 (DC power supply) is used; This cover protects the connec-
tor for supplying power. Loosen the screws on the front panel, remove the rear panel
screws, rotate 180 degrees, and tighten the screws again to hold the cover in place.
Damage to the unit is liable to occur if used with the cover removed. When the option-
al power supply is in use, attach the cover to protect the connectors.
(33) Screw Hole for Option Attachment
Screw hole used to attach optional BP-70 unit to this oscilloscope.
Fig. 5
15