Safety - Kenwood CS-3035 Instruction Manual

Symbol in This Manual
fi\ This symbol indicates where applicable cautionary or other imformation is to be found.
Power Source
This equipment operates from a power source that does not apply more than 250 V rms
between the supply conductors or between either supply conductor and ground. A pro-
tective ground connection by way of the grounding conductor in the power cord is essen-
tial for safe operation.
Grounding the Product
This equipment is grounded through the grounding conductor of the power cord. To avoid
electrical shock, plug the power cord into a properly wired receptacle before connecting
to the equipment input or output terminals.
Use the Proper Power Cord
Use only the power cord and connector specified for your product.
Use the Proper Fuse
To avoid fire hazard, use a fuse of the correct type.
Do not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Do not Remove Cover or Panel
To avoid personal injury, do not remove the cover or panel. Refer servicing to qualified
personnel.
Voltage Conversion
If the power source is not applied to your product, contact your dealer. To avoid electrical
shock, do not perform the voltage conversion.
2

SAFETY