Summary of Contents for Surefire NITROLON COMMANDER 8NX Series:
Page 1
COMMANDER Rechargeable Illumination Tool 110 Lumens With the purchase of this SUREFIRE flashlight, you have invested in one of the world’s best “illumination tools.” We believe it to be a prime example of our philosophy that design decisions should always be made in the interest of the product being the very best it can be.
Page 4
There are two ways to turn on the 8NX Commander. To turn it on momentarily, simply apply pressure to the button on the end of the body. Remove the pressure and the light goes off. You can adjust how far you have to push for the light to come on by rotating the head relative to the body.
SPECIFICATIONS Power Output 110 Lumens Run Time 50 Minutes (approx.) Battery Type B90 Ni-Cd Number Required Battery Supplied One w/#8NX000 Two w/#8NX415 Length 7 inches Weight 8.2 ounces Diameter Body 1.10 inch Bezel 1.5 inch Lamp Assembly X80 - Xenon Lens Polycarbonate Switch...
PARTS REPLACEMENT LIST Component Part No. Battery Protective Battery Cap 30-03-014 Bezel Assembly 13908 Flashlight Body 13903 Flashlight Head Assembly 13909 110 lumen Lamp Assembly Lens 11956-11 O-Ring Seal (Head) 19-01-028 O-Ring Seal (Body) 19-01-054 Charger Head Assembly CN400 Power Supply (Country dependant) T210, T220, T240 &...
Page 7
8NX COMMANDER PUSH BUTTON FLASHLIGHT BODY BODY O-RING HEAD ASSEMBLY VENT HOLE B90 BATTERY HEAD O-RING BATTERY CAP X80 LAMP BEZEL LENS POWER TRANSFORMER CHARGER HEAD ASSEMBLY B90 Ni-Cd BATTERY RED Indicator light ADAPTER 12VDC GREEN Indicator light INLINE CONNECTOR...
CHANGING THE LAMP 1. Remove the Flashlight Head from the Flashlight Body by holding the Head and ro- tating the Body counterclockwise (as viewed from the tail of the Flashlight) until it is free of the Head. 2. Separate the Bezel from the Flashlight Head by holding the Bezel and rotating the Head counterclockwise until the two separate.
Page 9
1. Remove the Flashlight Head by unscrewing it until it is free of the Flashlight Body. 2. Remove the protective cap from the end of the B90 Ni-Cd Battery. 3. Insert the negative (-) end of the Battery into the Flashlight Body with the positive (+) end of the Battery facing out toward the Flashlight Head.