StarTech.com NETRS232 Quick Installation Manual page 10

9
C. Activating & Deactivating NETRS232 ports
NETRS232 ports that have been detected as existing on the
network are not initially activated for your PC.To access a NETRS232
port it must be activated.You may wish to activate on a given
computer some, all, or none of the NETRS232 ports that are
available on the network.To activate a particular port, right click on
the port where it is displayed in the right panel of the
Manager , and select "Activate".To activate all ports on a particular
NETRS232, right click on that device in the left panel of the
Manager and select "Activate All" .
Before activation, NETRS232 ports only appear under the "My IP-
Extender Network" branch of the IP-Extender Desktop. Once they
have been activated for a local system, they will also appear under
"My Computer" in the
To deactivate ports
individually, right-
click on the port
where it is displayed
in the right panel of
the IP-Extender
Manager , and select
"Deactivate".To
deactivate all ports
on a particular NETRS232, right click on that device in the left panel
of the Manager
IP-Extender Manager
and select "Remove All" .
IP-Extender
.