Operation - Kärcher FC 7 Cordless Operator's Manual

Inserting the waste water tank
1. Place the device in the middle of the
waste water tank so that it is posi-
tioned between the rollers, and then
audibly clicks into place. The posi-
tion of the tank is not important here,
as it can be used in both longitudinal
directions in the device.
The waste water tank must sit firmly
in the device.
Filling the fresh water tank
1. Grasp the fresh water tank by the re-
cessed grips on the side, and re-
move it from the device.
2. Open the tank cap and turn it to the
side.
a
b
c
3. Fill the fresh water tank with cold or
lukewarm tap water.
10
4. If desired, add KÄRCHER detergent
or care agent to the fresh water tank.
ATTENTION
Overdosing or underdosing of de-
tergent or care agent
Can lead to poor cleaning results.
Pay attention to the dosage recom-
mendations for the detergent or care
agent.
5. Close the tank cap.
6. Insert the fresh water tank into the
device.
The fresh water tank must sit firmly
in the device.
General information on
ATTENTION
Moisture
Damage to sensitive floors
Before using the device, check the
floor in an inconspicuous place for wa-
ter consistency.
Do not clean any water-sensitive cov-
erings such as untreated wood or other
porous soft flooring material, as mois-
ture can penetrate and damage the
floor.
English

Operation

operation