Page 8
English Vacuum polisher Safety instructions Make sure that the power cord or exten- Please read and comply with sion cables are not damaged by run- these safety instructions prior ning over, pinching, dragging or similar. to the initial operation of your appliance. Protect the cable from heat, oil, and Retain these safety instructions for use for sharp edges.
Page 9
English Vacuum polisher If the appliance is used in hazardous ar- Transport eas (e.g. filling stations) the corre- The engine is to be brought to a standstill sponding safety provisions must be and the appliance is to be fastened properly observed.
Page 10
English Vacuum polisher Guarantee The terms of the guarantee that is applicable in each country have been published by our respective national distributors. Any fault that occurs with your appliance during the guarantee period will be repaired free of charge, provided that it has been caused by a material or manufacturing defect.
Page 11
English Vacuum polisher Changing the brushes and felt discs Always pull out the mains plug before changing the brushes or felt discs. Turn the unit over and simply pull off the discs. Insert the brushes or felt discs of your choice. Ensure that the catches on the discs are locked securely to the holding fixture.
English Vacuum polisher Care and maintenance Always pull out the mains plug before carrying out any maintenance work. Use only original spare parts. Cleaning the brushes and felt discs The brushes can be cleaned very simply with soap and water. Clean the felt discs with soapsuds and a brush.