Advertisement
Removing a CFC or DFC Daughter Card
Figure 1
CFC Daughter Card Installation Hardware
Cap nuts (2)
Card removal
tabs (2)
CFC daughter card
Heat sinks
Screws (3)
WS-X5530
To unseat the CFC daughter card from the Ethernet module, hold each tab at the rear of the CFC daughter
Step 5
card between your thumb and index finger, and gently press down on both tabs until the connectors are
unseated. (See
Figure
2.)
Caution
Do not apply too much pressure on the tabs because you might cause damage to the module.
Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note
10
78-15893-08
Advertisement
