Blue LED/Red LED
Remote receiving
window
2-Laser Sensor
Get Started
Step 1.
Preparing
(5) Do not use the device on rainy or humid days.
(6) For windows with no balcony, a warning area must be established on the
ground below to prevent people from coming near it.
(7) Check to see if the safety rope is broken or if the knot is loose.
(8) Fasten the safety rope and tie to an indoor fixture before operating if
clean outside of higher floor window.
Step 2.
Connect the adaptor and DC extension cord to HOBOT correctly.
Power adapter
STEP 3 :
Connect AC cord to
AC power port
STEP 1
DC extension cable
- 17 -
2-Caterpillar wheel
Cleaning cloth
Suction area
Safety rope & buckle
DC plug
L-shape connector
STEP 2 :
Plug into DC power jack
SmartBot HOBOT – www.hobot.es