◎Important Safety Precautions Please read all instructions before using. The device can be used by children aged from 8 and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
Page 3
Furthermore, HOBOT Technology Inc. reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to provide notification of such revisions or changes.
◎Specifications Model No LEGEE-668 LEGEE-669 Cleaning Method FastBrush 4-Stage Cleaning Mopping Speed 600 times/min. Navigation Technology LEGEE V1.0 LEGEE V2.0 ® ® Path Map, Parallel Moving Speed 20 cm/sec. Vacuum Motor DC motor Brushless DC motor Water Control Pump Control, Smart Spray...
Device Charging station AC adapter Remote control Cleaning cloth Spray nozzles Water bottle Side brush HEPA filter User manual ◎Remote Control LEGEE-668 LEGEE-669 Action Return Home Cleaning Mode: Auto Cleaning Mode: Spot Cleaning Mode: Wall-follow Cleaning Mode: Parallel Stop Cleaning...
Page 8
◎Exclusive Patent License FastBrush 4-Stage Cleaning FastBrush 4-stage cleaning allows LEGEE to complete vacuum, dry mopping, water spray and wet mopping in one take. The powerful vacuum can easily pick up small particles such as dust and hair, then mops the surface with the front cleaning cloth at 600 times/min.
Page 9
◎Getting Ready to Use LEGEE 1. Install Charging Station Step 1. Place the charging station against a wall on hard surface flooring to prevent sliding during docking. Step 2. 1.5 M Ensure that there no objects at least 1.5 meter in front and 1.5 meter to the right and 1.5 M 1.5 M left of the charging station.
Page 10
4. Fill Water Fill water or LEGEE detergent to the water tank by using the supplied bottle and seal the water tank with the plug after filling. 5. Start/Stop Cleaning Step 1. Start cleaning: Lift open the cover and press down the power switch, then close the cover and press on the device or on the remote control.
◎Cleaning Process 1. Scan LEGEE will travel along the wall to “find a straight wall” to set the alignment anchor before starting the cleaning task. If the wall (or the 10cm height wall from the floor) is too dark, LEGEE won’t be able to identify it as a straight wall. In case the room is too dark or with too many obstacles, it will take LEGEE few more attempts until it can start the cleaning task.
3. Finish Cleaning (HOME mode) LEGEE will take several seconds to check if it has finished cleaning the entire floor. LEGEE will then travel along the wall for 20~30 cm to look for the charge station. If the charging station couldn’t be found, LEGEE will continue travel along the wall to find the charging station.
Page 13
⚫ Use a clean, dry soft cloth or to clean 7 laser sensors. (as indicated in the illustration below) ⚫ Care Frequency: Before each use. 2. Empty Trash Bin & Clean HEPA Filter ⚫ Take out the trash bin by lifting the top handle and open the trash bin to remove the dust.
Page 14
4. Replace Spray Nozzles ⚫ Use small screwdriver to remove the screw and nozzle. ⚫ Clean / remove the nozzle and screw it back. ⚫ Care Frequency: When nozzle is clogged and cannot spray water. - 13 -...
◎Frequently Asked Questions (FAQ) Case Solution 1. Cannot be Check if the battery has been charged. switched on Check if the adapter is properly connected to the 2. Cannot be charging station and it has been plugged into the charged socket.
Need help?
Do you have a question about the Legee-668 and is the answer not in the manual?
Questions and answers