2. Check if the safety rope is broken or the knot is loose before operating the device. 3. A power cord must be used for the HOBOT to function properly. 4. For windows with no balcony, a warning area must be established on the ground below to prevent people from coming near it.
The pressure sensor monitors air leakage and the laser sensor detects the edge of windows. HOBOT has AI Technology that can calculate paths, auto-detect window edges, and auto-clean entire windows. It also features a mode for manual operation. Specifications...
(3) Check to see if the safety rope is broken or if the knot is loose. (4) Fasten the safety rope and tie to an indoor fixture before operating if clean outside of higher floor window. - 5 - HOBOT Technology Inc.
Page 7
(3) Check if device is sticking to the glass before releasing it. Step 6. Auto mode or manual mode operation. (1) Operate HOBOT by remote controller. There are 3 kinds auto mode ( ) that could automatically clean whole window. (2) Press to stop device running.
Page 8
Microfiber polishing cloth : it can be used for wet or dry clean and suitable for dust-free exterior windows and interior windows due to its higher friction factor and better water absorbency. - 7 - HOBOT Technology Inc.
Using HOBOT on sunny days or days with low humidity for best results. The surface of window with water molecules becomes slippery and has white streaks left on the glass so it is not suggested using the device to clean exterior windows on rainy or high humidity days.
Setting up the device with the HOBOT App. ( HOBOT-288 only ) Step 1: Scan QR code or search “HOBOT” on the App Store or Google Play to download HOBOT app on your smart phone or tablet. Step2. Turn on Bluetooth and click HOBOT App.
Q2: When the power switch is turned on, the FAN is rotating, Blue-LED is lighting, Red-LED is flashing, with repeat beep sounds. Ans: No electrical power supplied. Please connect and check power cord, adapter, and the device. - 10 - HOBOT Technology Inc.
Page 12
Q8: What to do if HOBOT stops due to a power outage? Ans: (1) User can pull HOBOT back with safety rope. Gently pull the safety rope at an angle close to the glass to prevent it from falling off the glass.
Q9: What to do if HOBOT unexpectedly stops and the red light is flashing, with no alarm sounding? Ans:(1) User can move HOBOT to safe area by remote control, or pull HOBOT back with safety rope. Gently pull the safety rope at an angle close to the glass to prevent it from falling off the glass.
Do not dry clean. Limited warranty If there are defects in your HOBOT glass-cleaning robot due to faulty materials, poor workmanship, or malfunction within the warranty period from the date of purchase or delivery, please contact a local retailer or local authorized dealer for repairs or replacement.
The warranty for HOBOT-268/288 is 12 months from the date of purchase. The warranty for the battery is 6 months from the date of purchase. The service life of HOBOT-268/288 is 5 (five) years from the date of purchase. Robot’s serial number must be registered to receive limited warranty service.
Need help?
Do you have a question about the 268 and is the answer not in the manual?
Questions and answers