Hobot LEGEE 7 User Manual

Hobot LEGEE 7 User Manual

Vacuum mop 4 in 1 robot

Advertisement

FastBrush + Talent Clean + LEGEE SLAM
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LEGEE 7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hobot LEGEE 7

  • Page 1 FastBrush + Talent Clean + LEGEE SLAM User Manual...
  • Page 2: Important Safety Precautions

    The power adapter is designed for connection to hazardous electrical voltages. Do not attempt to repair the adapter. Replace the whole unit if it is damaged or exposed to high moisture. Consult local HOBOT dealer for help and maintenance. ⚫ Make sure the device, power adapter and charging station are not trapped under heavy objects.
  • Page 3: Copyright And Trademarks

    ◎Copyright & Trademarks © ® Copyright 2020 by HOBOT Technology Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
  • Page 4: Limited Warranty

    Furthermore, HOBOT Technology Inc. reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to provide notification of such revisions or changes.
  • Page 5: Product Features

    ◎Product Features Exclusive Patent License: FastBrush 4-Stage Cleaning FastBrush 4-stage cleaning allows LEGEE to complete vacuum, dry mopping, water spray and wet mopping in one take. LEGEE has the powerful 2700Pa vacuum power to pick up small particles such as fine dusts and hair; and the reciprocating moving mechanism to Imitate the human behavior by applying the maximum 900 times/min mopping speed with1800g mopping force against the floor to remove the stubborn dust and stain.
  • Page 6 Mode Introduction HOBOT exclusive patent. Specialized to clean the stubborn stains we often left behind on the floor. LEGEE will first divide the area to 1.5×1.5 m and spray generous amount of water to dissolve the...
  • Page 7 ◎About LEGEE 7 Front Cliff Sensor Front Cliff Sensor Side Brush Suction Head Front Cleaning Cloth Spraying Nozzle Caterpillar Belt Rear Cliff Sensor Rear Cliff Sensor Rear Cleaning Cloth Start/Stop LED Indicator Polish Strong Mode Mode Water Tank Home Water Tank Lid...
  • Page 8: Getting Ready

    ◎Getting Ready 1. Install Charging Station and Waterproof Mat Step 1. Place the charging station against a wall on hard surface flooring to prevent sliding when charging. Step 2. Clear the objects at least 1.5 meter in front and 1.5 meter to the right and left of the charging station.
  • Page 9 5. Fill Water/Detergent Fill water or LEGEE detergent to the water tank by using the supplied bottle and seal the water tank with the plug after filling. 6. Start/Stop Cleaning Step 1. Start cleaning: Lift open the cover and press down the power switch, then close the cover and press on LEGEE or App.
  • Page 10: App Instructions

    ⚫ Please turn on Wi-Fi function on your smartphone and connect. 2. HOBOT Account HOBOT account will only store LEGEE’s device initial name, while all the data in the schedule queue, cleaning diary, memorized maps and all customized setting are stored in LEGEE and will never be accessed via HOBOT account. When you...
  • Page 11: Cleaning And Maintenance

    ◎Cleaning & Maintenance 1. Clean the Cliff Laser Sensors Use a clean, dry soft cloth or to clean the cliff sensors. (as indicated in the illustration) Care Frequency: Before each use or follow App's reminder. 2. Empty the Trash Bin Take out the trash bin by lifting the top handle.
  • Page 12 5. Clean the Side Brush Step 1. Pull off the side brush, then gently rub the side brush with warm water to clean the dirt off and restore it to its original shape. Step 2. Reinstall the side brush. Care Frequency: After each use. Please contact a local retailer or local authorized dealer for additional consumable spare parts.
  • Page 13: Led Indication

    8. Unclog the Spraying Nozzle Use the push pin to poke the center of the spraying nozzle to remove water residue. Care Frequency: When nozzle is clogged and cannot spray water. 9. Replace the Spraying Nozzle Use a small screwdriver to remove the screw and nozzle. Replace with new nozzle and screw it back.
  • Page 14: Frequently Asked Questions (Faq)

    Weak Wi-Fi signal, please make sure LEGEE and the connecting smartphone are both in the same area with consistent Wi-Fi coverage. b) Please update HOBOT LEGEE App and try again. c) Wrong password. 13. Unable to link to Please restart LEGEE and App.
  • Page 15: Specifications

    ◎Specifications Model No. LEGEE 7 WiFi 802.11a/b/g/n/bt Battery Li-ion 4500 mAh Device size (L×W×H) 340×339×100 mm (13.4×13.3×3.9 in) Charging Station Input voltage 100-240 VAC, 50-60 Hz Power consumption 19V/1.05A, 19.95W ◎Product and Accessories LEGEE 7 Charging station AC adapter User manual...

Table of Contents

Save PDF