Battery Exchange - G-U PRIME OFFICE 2170 Installation, Operating And Maintenance Instructions

Installation, operating and maintenance instructions
Radio locks PRIME OFFICE 2170 (EN 179) for toughened glass doors
5

Battery exchange

The radio lock PRIME OFFICE 2170 is operated with a special 3.6 V AA battery (for approved battery types see chapter 1.1 Technical
specifications Power supply).
The battery offers a performance of 150,000 cycles at continuous operation. However, this value may vary depending on ambient
temperature, radio reception and storage conditions. In order to ensure the reliable functioning of the lock, it is necessary that the battery
should be exchanged as soon as one of the two low-battery alarm levels is reached (see chapter 3) or after 2 years.
Unscrew the lower screw (cylinder fixing screw) of the cover by approx. 5 mm. Then remove the upper screw so the cover
can be swivelled to the side.
Remove the old battery from the holder and replace it with a new one. When inserting the new battery ensure the positive pole is
directed towards the bottom!
Fix the cover again with the upper fastening screw while not overtightening it! Then retighten the cylinder fixing screw again.
The battery must be disposed of as special waste, by no means as domestic waste!
12
Fig. 12: battery exchange
0-45648-3E-0-GB, modif. 1, sheet 12/20, Mod. No. G24578, www.g-u.com 01/2011