Led Display And Control Elements - G-U PRIME OFFICE 2170 Installation, Operating And Maintenance Instructions

Radio locks (en 179) for toughened glass doors
Table of Contents

Advertisement

Available languages

Available languages

Installation, operating and maintenance instructions
Radio locks PRIME OFFICE 2170 (EN 179) for toughened glass doors
3

LED display and control elements

The operating and switching statuses of radio lock and wall module are indicated by means of several LEDs at the front of the wall module.
Here you will also find button 'S1' required for the Pairing procedure. The antenna of the wall module is accommodated on the right side of the
frame. Do not loosen the four fastening screws in order not to damage the antenna input connection.
Status
Voltage being supplied
Lock is not paired
Pairing has started
Pairing completed successfully
No radio communication / Pairing
unsuccessful
Successful Repairing
Low-battery alarm level 1
Low-battery alarm level 2
S1
Name
Type
S1
Push button
L1
LED
L2
LED
L3
LED
L4
LED
L5
LED
L6
LED
L7
LED
Antenna
7
Low buzzing sound during the boot process,
single beep when boot process completed;
two beeps (beep – beep) /
Indication of signal force on LED L3
two beeps (beep – beep),
10 s beep at intervals (beep – beep –...)
option: indication on LED L2
20 s quick beeps at intervals /
option: indication on LED L2
L5
L7
L1
L2 L3 L4
L6
LED display and control elements
Colour
---
Pairing pushbutton
Status of control input:
yellow
Status of configurable output (see page 11, Fig. 11):
Status of locking cam:
red
Status of outside handle:
Status of battery:
green/yellow/red
Indication of signal force of last received message (see Fig. 3)
Status of wall module:
yellow
red
ON → Transmission/reception of radio data
Status of door bus:
yellow
Status of latchbolt:
red
---
Antenna with metallic support frame
System signals
Wall module
indication on LED L4
---
LED L5 flashing,
permanent beep
1 s continuous tone
only LED L2 active
Fig. 3:
Front view / Radio module performance
Reception intensity:
+++ = high; ++ = medium; + = poor; ─ = no reception
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
flashing → door bus active
OFF
ON
OFF
0-45648-3E-0-GB, modif. 1, sheet 7/20, Mod. No. G24578, www.g-u.com 01/2011
Radio lock
---
two-time activation of motor after
battery insertion
---
---
---
five-time activation of motor
---
---
Description
→ control signal produced
→ control signal not produced
→ locking cam operated
→ locking cam not operated
→ disengaged
→ engaged
→ low-battery alarm level 1 or 2 active
→ battery OK
→ active
→ no power supply
→ door bus fault
→ door bus inactive / not connected
→ retracted
→ ejected

Advertisement

Chapters

Table of Contents
loading

Table of Contents