Operation - Hammerhead HLLT16 Manual

OPERATION

1. BATTERY INSTALLATION (Fig. 2)
This Digital Angle Finder uses two "AA"
batteries.
a. Open the battery cover, located in
the back of the tool (Fig. 2).
b. Insert two new "AA" alkaline
batteries with the polarity (+/-)
as indicated on the inside of the
battery compartment.
c. Securely close the cover.
NOTE:
• Always turn off the tool before installing or replacing the batteries.
• Replace the batteries when the battery indicator appears and blinks on the
LCD display screen.
• Remove the batteries from the Digital Angle Finder when it is not used for
extended periods.
• The 2 AA batteries should match each other in brand and type.
• Do not mix old and new batteries.
• Remove depleted batteries immediately, and dispose of them according to
your local ordinance.
• Never dispose of batteries in fire.
16" DIGITAL ANGLE FINDER
2
9