Hammerhead HLLT16 Manual page 11

OPERATION
4. MEASURING ANGLES (Fig. 3)
a. Press the ON/OFF button to turn
on the tool.
b. Unfold the folding leg from the
base leg (level body).
c. Place each of the two legs flat
against one of the surfaces
forming the angle.
d. The interior angle α between the
base leg and the folding leg is
measured and shown on the LCD display.
NOTE:
• If the digital display cannot be read easily (e.g., when working overhead),
press the HOLD button to freeze the display, and the indicator "H" will blink
on the LCD display. The value on the display does not change even when the
legs are moved with respect to each other and the tool is moved. Press the
button again to free the display.
• Contact surfaces and contact edges must be clean. Dirt particles may lead to
inaccurate measurements.
16" DIGITAL ANGLE FINDER
3
α
11