Maintenance - Hammerhead HLLT16 Manual

MAINTENANCE

This Digital Angle Finder has been designed to be a low-maintenance tool.
However, in order to maintain its performance, you must always follow these
simple directions.
• Avoid exposing the tool to shock, continuous vibration or extreme hot or cold
temperatures.
• Store the tool indoors and in a safe place.
• Handle the tool with care. Treat it as a precision optical device, such as a
camera or binoculars.
• Always clean the tool with a clean, soft cloth. If necessary, slightly moisten
the cloth with pure alcohol or a little water.
• Check the batteries regularly to avoid deterioration.
• Always remove the batteries from the tool if it is not going to be used for an
extended period of time.
• Replace the batteries when the battery icon displayed on the screen indicates
that they are fully depleted.
• Do not attempt to change any part of the tool.
• Tool service must be performed only by a qualified repair center. Service or
maintenance performed by unqualified personnel could result a risk of injury.
16" DIGITAL ANGLE FINDER 17