Hammerhead HLLT16 Manual page 7

DESCRIPTION
PARTS DESCRIPTION
1 Folding leg
2 Window for horizontal bubble level
3 Window for vertical bubble level
4 Joint cover
5 Base leg
6 SPR Button: stores the spring angle as a fixed value
7 SPR/CNR/MTR/BVL Button: for calculating the miter and bevel angle
(identified as "MTR/BVL button" in this manual)
8 POWER button: turns the Digital Angle Finder on or off; flips the
display
9 HOLD button: freezes the display on the screen; press again to free
the display
10 Encased bubble vials: The highly sensitive vials ensure the tool has
an accuracy of 0.029° for determining level and plumb
11 Hanging hole: for convenient storage
12 Cushioned end cap: to help protect the device from damage
13 Leg extension: for accurately measuring hard-to-reach angles
14 Battery compartment: for two "AA" batteries to power the tool
15 Dual LCD display: large dual LCD display with back lighting for clear
reading from front and back
16" DIGITAL ANGLE FINDER 7