Contents STEAM CLEANER OPERATOR`S MANUAL IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS..Description of the unit ......Initial commissioning......Installation........... Operation ..........Important application instructions ..Use of accessories......Care and service......... Troubleshooting guide......English...
STEAM CLEANER OPERATOR`S MANUAL IMPORTANT Store the device in a suitable loca- tion after use to avoid tripping acci- SAFETY dents. INSTRUCTIONS Do not expose to rain. Repairs are only to be carried out by qualified personnel. Ensure that on- Observe all basic precautions when ly identical original spare parts are using the device, including the follow-...
Page 4
Never insert objects into the device The steam switch must not be openings. Do not use the device if locked during the operation. the device openings are blocked. The device must be placed horizon- Never fill solvents, solvent-contain- tally on the floor during use.
GROUNDING EXTENSION CORDS If an extension cord is absolutely nec- INSTRUCTIONS essary, an extension cord rated a min- imum of 15 ampere 14 gauge cord should be used. Cords rated for less This device must be grounded. If it amperage may overheat.
Page 6
Safety devices Symbols on the device CAUTION (according to type of the device) Risk of burns, surface of de- Missing or modified safety devices vice becomes hot during op- Safety devices are provided for your eration own protection. Risk of scalding from steam Never modify or bypass safety devic- Read the operating instruc- Pressure regulator...
Page 7
ture reference the manufacturer`s Technical data instructions. Electrical connection Scope of delivery Voltage The scope of delivery for the appliance Phase is shown on the packaging. During un- Frequency packing, check the contents for com- Degree of protection IPX4 pleteness. If any accessories are Protection class missing or in the event of any shipping damage, please contact our Customer...
Initial commissioning Decalcification cartridge Filling hole for water ATTENTION Carrying handle Device damage due to calcification Holder for accessories The decalcification cartridge only Display works properly if you adjust the device Indicator light (green) - mains volt- age present to the local water hardness before op- Indicator light (red) - water shortage erating it for the first time.
Installation 3. Push the open end of the accessory onto the spotlight nozzle. Installing accessories 1. Insert and engage the steering roller and non-driven wheels. 4. Connect extension tubes with the steam gun. a Push the 1st extension tube onto 2.
Operation 5. Push the accessory and / or the floor nozzle onto the free end of the ex- Filling with water tension tube. The water reservoir can be filled at any time. ATTENTION Damage to the device Unsuitable water can block the nozzles or damage the water level indicator.
Page 12
Note Note When steaming for the first time after After the cartridge is inserted for the removing and reinserting the decalcifi- first time or has been replaced, it takes cation cartridge, the steam jet may be about 60 seconds for a good steam im- weak or irregular, and individual drops age result.
Page 13
switches off and the red water shortage 2. Press the steam lever until no more indicator light flashes. steam flows out. To be able to operate the device again, the device has to be switched off and back on again. In the process, you must make sure that the cartridge has been inserted correctly and there is enough water in the water reservoir.
Important application Keep the device safe instructions 1. Plug the extension tubes into the large holders for accessories. Cleaning the floor areas 2. Plug a manual nozzle and spotlight We recommend sweeping the floor or nozzle into each extension tube. vacuum cleaning it before using the 3.
Glass cleaner to soak in for approx. 5 minutes and then steam it off. ATTENTION 1. Slide the spotlight nozzle onto the Glass breakages and damaged sur- steam gun. faces Steam can damage sealed points of the window frame and, at low exterior temperatures, lead to tension on the surface of window panes and hence to glass breakages.
Page 16
to streaks during steam cleaning, Manual nozzle which will disappear however once The manual nozzle is used for cleaning these have been used several times. small areas that can be washed down, We recommend sweeping the floor or shower cubicles and mirrors. vacuum cleaning it before using the 1.
Page 17
3. Attach floor cleaning cloth to floor Removing the floor cleaning cloth nozzle. 1. Place one foot on the bottom corner a Place the floor cleaning cloth with of the floor cleaning cloth and lift the the hook and loop fastener point- floor nozzle up.
Note Care and service The replacement intervals depends on Draining the water reservoir the local water hardness. Areas with ATTENTION hard water (e.g. III/IV) have a higher Device damage due to water putre- replacement interval than areas with faction soft water (e.g. I/II). If the device is not put into operation for Indicator lamp at end of the run time more than 2 months, the water in the...
Page 19
1. Press the OFF switch. The water hardness is set using the The device is switched off. RESET button. The water hardness 2. Remove the decalcification car- setting is stored until a new setting tridge. (e.g. after a move) is made. The device 3.
Page 20
Care of accessories otherwise be set automatically to the last selected water hardness or the (Accessories - depending on scope of delivery) highest water hardness set during ini- Note tial start-up. 1. Connect the mains plug. The microfiber cloths are not suitable 2.
Troubleshooting guide The decalcification cartridge has been removed while topping up the water. Malfunctions often have simple causes Leave the decalcification cartridge that you can remedy yourself using the in the device when topping off. following overview. When in doubt, or New decalcification cartridge has been in the case of malfunctions not men- inserted.
Need help?
Do you have a question about the SC 3 EasyFix and is the answer not in the manual?
Questions and answers