Usetftp; Tftpurl - Cisco ATA 186 Administrator's Manual

Chapter 5 Parameters and Defaults

UseTFTP

Settings
1—Use the TFTP server for Cisco ATA configuration.
0—Do not use the TFTP server for Cisco ATA configuration.
Value Type
Boolean
Range
0 or 1
Default
1
Voice Configuration Menu Access Code
305
Related Parameters
•
•
•
•

TftpURL

Description
Use this parameter to specify the IP address or URL of the TFTP server. This string is needed if the DHCP
server does not provide the TFTP server IP address. When the TftpURL parameter is set to a non-zero value,
this parameter has priority over the TFTP server IP address supplied by the DHCP server.
Optionally, you can include the path prefix to the TFTP file to download.
For example, if the TFTP server IP address is 192.168.2.170 or www.cisco.com, and the path to
download the TFTP file is in /ata186, you can specify the URL as 192.168.2.170/ata186 or
www.cisco.com/ata186.
From the voice configuration menu, you can only enter the IP address; from the web server, you can enter
Note
the actual URL.
Value Type
Alphanumeric string
Range
Maximum number of characters: 31
OL-4008-01
TftpURL, page 5-5
EncryptKey, page 5-6
OpFlags, page 5-33—bits 0 and 3
CfgInterval, page 5-6
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323)
Parameters for Configuration Method and Encryption
5-5