Dialplan - Cisco ATA 186 Administrator's Manual

Chapter 5 Parameters and Defaults
Default
1
Voice Configuration Menu Access Code
310

DialPlan

Description
The programmable dial plan is designed for the service provider to customize the behavior of the
Cisco ATA for collecting and sending dialed digits. The dial plan allows the Cisco ATA user to specify
the events that trigger the sending of dialed digits. These events include the following:
•
•
•
•
Value Type
Alphanumeric string
Range
Maximum number of characters is 199.
Default
*St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.-
Voice Configuration Menu Access Code
926
Additional DialPlan Information
The DialPlan section contains the following additional topics that describe commands and rules for
creating your own dial plan:
•
•
•
•
OL-4008-01
The termination character has been entered.
The specified dial string pattern has been accumulated.
The specified number of dialed digits has been accumulated.
The specified inter-digit timer has expired.
About Dial Plan Commands, page 5-38
Dial Plan Blocking (In Rule), page 5-39
'H' Rule to Support Hotline/Warmline, page 5-40
'P' Rule to Support Dial Prefix, page 5-40
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323)
Optional Feature Parameters
5-37