Specifications - Makita GN900 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Nail length X Shank diameter
Nail collation angle (degree)
Figure of nail head
Dimensions (L X W X H)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Container under pressure, keep away
from temperatures over 50°C (for ex. sun
radiation) Keep container in a well venti-
lated place.
Use only outside or well ventilated rooms.
Do not breathe gas.
Do not use near flames or sprays on
heated surfaces. In use, may form flamma-
ble/explosive vapour-air mixture.
Do not damage, puncture or burn even
after use.
Wear safety glasses.
Keep fingers away from trigger when not
driving fasteners to avoid accidental firing.
Use only in ventilated area to avoid nausea
and unconsciousness. Never use tool
in combustible atmospheres. The tool
exhaust may ignite flammable materials.
Do not use on scaffoldings, ladders.
Warning: hot surface!
Do not touch around this symbol. Touching
the surface may cause burns or injuries.
Model
Nail capacity
Net weight
Nail L :50 mm - 90 mm d : 2.9 mm - 3.3 mm
321 mm X 108 mm X 368 mm
Only for EU countries
Cd
Ni-MH Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for the preliminary interior work
such as fixing floor joists or common rafters and framing
work in 2 "x 4" housing.
Noise
The typical A-weighted noise level determined accord-
ing to EN792:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value determined according to
EN792:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
5 ENGLISH
GN900
40 nails (1strip)
34
Clipped
3.3 kg
D.C. 7.2 V
) : 89 dB (A)
pA
) : 102 dB (A)
WA
2
) : 2.5 m/s or less
h
2