Important Safety Instructions - Kärcher G 4000 OH Operator's Manual

Hide thumbs Also See for G 4000 OH:
Table of Contents

Advertisement

Available languages

Available languages

Read the operating instructions of
the engine manufacturer before
start-up and follow the safety in-
structions carefully.
WARNING
When using this product basic precau-
tions should always be followed, in-
cluding the following:
Read all the instructions before us-
ing the product.
To reduce the risk of injury, close
supervision is necessary when a
product is used near children.
Know how to stop the product and
bleed pressures quickly. Be thor-
oughly familiar with the controls.
Stay alert – watch what you are do-
ing.
Do not operate the product when fa-
tigued or under the influence of al-
cohol or drugs.
Keep operating area clear of all per-
sons.
Do not overreach or stand on unsta-
ble support. Keep good footing and
balance at all times.
Wear safety goggles.
Follow the maintenance instruc-
tions specified in the manual.
WARNING
Risk of Injection or Severe Injury to
Persons – Keep Clear of Nozzle –
Do Not Direct Discharge Stream At
Persons. This machine is to be
used only by qualified operators.
High pressure jets can be danger-
ous if misused. The jet must not be
directed at persons, animals, elec-
trical devices, or the unit itself.
Do not spray electrical connections,
electrical outlets or fixtures.
4

IMPORTANT SAFETY INSTRUCTIONS

WARNING
Risk Of Explosion – Do not spray
flammable liquids.
Do not use acids, alkaline, solvents,
or any flammable material in this
product. These products can cause
physical injuries to the operator and
irreversible damage to the ma-
chine.
WARNING
Gun Kicks Back – Hold with both
hands.
The Trigger Gun Safety Lock pre-
vents the trigger from accidentally
being engaged. This safety feature
DOES NOT lock trigger in the ON
position.
-WARNING
To avoid risks, all repairs and re-
placement of spare parts may only
be carried out by authorized cus-
tomer service personnel.
Set the pressure reducer on the
compressor to 25 psi before cor-
recting the tire pressure.
Tire pressure should not exceed
max. 25 psi.
CAUTION
Risk of Asphyxiation – Use this product
only in a well ventilated area.
Operate and fuel machine in a well
ventilated area, free of devices fea-
turing an open pilot or flame such
as boilers, water heaters, etc.
CAUTION
Risk of Fire – Do not add fuel when the
product is operating.
Do not operate if fuel has been
spilled. Instead, move the machine
to a different location and avoid cre-
ating sparks.
– 3
EN

Advertisement

Table of Contents
loading

Table of Contents