Transport; Storage - Kärcher K 5 Premium Full Control Plus Manual

Hide thumbs Also See for K 5 Premium Full Control Plus:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
Illustration
 Push the 3-in-1 multi jet spray lance into the high-
pressure gun and fasten it by a 90° rotation (ob-
serve alignment!).
 Select spray type, by turning the 3-in-1 multi jet
spray lance until the required spray display is visi-
ble above.
 Turn on the appliance "I/ON".
 Unlock the lever of the trigger gun.
 Push the lever of the trigger gun, the device will
switch on.
Note: Release the lever of the trigger gun; the de-
vice will switch off again. High pressure remains in
the system.
Operation with detergent
*
Optional accessories
Most KÄRCHER detergents can be bought ready to use
in a Plug 'n' Clean detergent bottle.
DANGER
When using detergents, the material data safety sheet
issued by the detergent manufacturer must be adhered
to, especially the instructions regarding personal pro-
tective equipment.
Note: Detergent can only be added when the device is
operated in low pressure mode.
Illustration
 Remove the cap of the Plug 'n' Clean detergent
bottle.
 Push the detergent bottle with the opening pointing
downwards into the connection for the Plug 'n'
Clean detergent.
 Turn the 3-in-1 multi jet spray lance to detergent
nozzle "MIX".
Note: This will mix the detergent with the water
stream.
 Using the +/- buttons of the high-pressure gun, set
the desired detergent concentration.
Foam nozzle
 Connect the detergent tank to the foam nozzle.
 Connect the foam nozzle to the trigger gun.
Recommended cleaning method
 Spray the detergent sparingly on the dry surface
and allow it to react, but not to dry.
 Spray off loosened dirt with the high pressure jet.
After operation with detergent
 Remove the Plug 'n' Clean detergent bottle from
the intake and close it with the lid.
 For storage, put the detergent bottle into the retain-
er with the cap pointing up.
 To rinse, operate the device for about 30 seconds
in detergent level 1.
Interrupting operation
 Release the lever of the trigger gun.
 Lock the lever of the trigger gun.
Illustration
 Put the trigger gun with the spray lance into the
parking position.
 During longer breaks (more than 5 minutes), also
turn the appliance off using the "0/OFF" switch.
14
CAUTION
Only separate the high-pressure hose from the trigger
gun or the device when there is no pressure in the sys-
tem.
ATTENTION
When disconnecting the supply or high pressure hose,
warm water may leak from the connections after opera-
tion.
 Release the lever of the trigger gun.
 Turn off tap.
 Press the lever of the high-pressure gun for 30 sec-
onds to release any remaining pressure in the sys-
tem.
 Release the lever of the trigger gun.
 Lock the lever of the trigger gun.
 Detach the appliance from the water supply.
 Turn off the appliance "0/OFF".
 Disconnect the mains plug from the socket.
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
When transporting by hand
 Lift appliance by the carrying handle and carry it.
 Pull out the transport handle until it audibly snaps
into place.
Pull the appliance by its transport handle.
When transporting in vehicles
 Prior to horizontal transport: Remove the Plug 'n'
Clean detergent bottle from the intake and close it
with the lid.
 Secure the appliance against shifting and tipping
over.
CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance when storing it.
Storing the Appliance
 Park the machine on an even surface.
 Detach spray lance from the trigger gun.
 Push the disconnect button on the trigger gun and
pull the high-pressure hose out of the trigger gun.
 Place the trigger gun into the storage for the trigger
gun.
 Put the 3-in-1 multi jet spray lance into the storage
for the spray lance.
 Store the mains connection in the accessory com-
partment.
CAUTION
Risk of personal injury or damage!
Observe the rotation direction of the hose reel upon coil-
ing up the high-pressure hose.
 Coil up the high-pressure hose.
Turn the hose reel in a counter-clockwise direc-
tion using the crank handle.
Prior to extended storage periods, as during the winter,
also observe the instructions in the Care section.
– 8
EN
Finish operation

Transport

Storage

Advertisement

Table of Contents
loading

Table of Contents