Carrier Acqua Junior 30AJ Series Installation, Operation And Maintenance Manual page 56

5.2 Unit dimensions
30AJ 004 e 005
ACCESS TO THE
EXPANSION
VALVE
Before placing the unit on the site check the following items (all models):
a) The fl oor shall bear the weight of the unit in operation. (See item 2 - Physical Data). Refer to the structural project of the building for the
applicable regulations concerning the admissible load. If required, reinforce the structure.
b) Choose a location with space enough to allow repairs and general maintenance services. The front of the equipment shall be free to allow the
air fl ow and the access to the unit inside.
30AJ 010
AIR DIRECTION
WATER OUTLET
2 THREADS
Before placing the unit on the site check the following items (all models):
a) The fl oor shall bear the weight of the unit in operation. (See item 2 - Physical Data). Refer to the structural project of the building for the
applicable regulations concerning the admissible load. If required, reinforce the structure.
b) Choose a location with space enough to allow repairs and general maintenance services. The front of the equipment
shall be free to allow the air fl ow and the access to the unit inside.
56
WATER INLET
THREAD
WATER OUTLET
THREAD
WATER INLET
AIR DIRECTION
ROTATION DIRECTION
AIR DIRECTION