VDO M6 Short Instruction Manual page 47

Setting the total values
SET
TPC
ALTI
– Open the settings menu:
– Scroll from Memory to Settings:
– Open the settings menu: press the
– Scroll to Total Values in the menu:
– Open the settings: press the SET button
BIKE
– Scroll to the total values in the
– Open the selected setting:
– Change the setting: Press the BIKE or
– Confirm your selection: Press the
– Close the settings menu/back to the
ATTENTION:
battery is replaced.
Press and hold the SET button until the
settings menu opens
Press the BIKE or TPC button
SET button
Press the BIKE or TPC button
settings: Press the BIKE or TPC button
Press the SET button
TPC button
SET button
function menu: press and hold the
SET button
all data is retained when the
47