DENTSPLY SmartLite Focus Instructions For Use Manual page 7

1.1 SmartLite FOCUS
®
1.1.1 ON/OFF key
• Starts or disrupts the 20-second curing cycle.
1.1.2 Battery light
• Permanently green
handpiece is inserted into the charging base
light is fully recharged.
• Flashing green
piece is inserted into the charging base
in Standard Charging Mode.
• Fast flashing green
handpiece is inserted into the charging base
light is in Automatic Quick Charging Mode.
• Flashing yellow
charging. At first occurrence approximately 1 minute curing time left.
• Permanently yellow
curing time left) and needs recharging.
1.1.3 Audible signals
• One blip: At start of curing cycle, after 10 seconds curing time together with flash-
ing blue LED, and when SmartLite
• Two blips: After 20 seconds consecutive curing time. Curing light automatically
extinguishes after 20 seconds.
• Repetitive short blip every 7 seconds together with flashing yellow battery
light: Only occurs when device is turned off. Approximately 1 minute operation
time left at first occurrence. Device needs recharging.
• One long blip together with permanent yellow battery light: Only occurs when
device is turned off. Device is fully discharged and needs recharging.
1.2 Indications
• Light-curing of dental materials which cure at a wavelength of 460-490 nm.
1.3 Contraindications
• Use in patients prone to photobiological reactions (including patients with solar
urticaria or erythropoietic protoporphyria) or those currently undergoing treatment
with photosensitizing pharmaceuticals.
curing light
® 1
1.1
(only indicated when SmartLite
1.2
(only indicated when SmartLite
1.2
(only indicated when SmartLite
1.2
: SmartLite
1.3
: SmartLite
1.3
– operation at a glance
): SmartLite
3
): SmartLite
3
): SmartLite
3
FOCUS is almost discharged and needs re-
® ®
FOCUS curing light is fully discharged (no
® ®
FOCUS curing light is fully recharged.
® ®
FOCUS curing light
® ®
FOCUS
®
FOCUS curing light hand-
® ®
FOCUS curing light is
® ®
FOCUS curing light
® ®
FOCUS
®
curing
®
curing
®
3