Standby Mode; Suspend Mode - HP Jornada 520 User Manual

The HP pocket camera has two power-saving modes: Standby
and Suspend.

Standby Mode

In Standby mode, the pocket camera uses less power. It enters
Standby mode after a preset period of inactivity (that is, when
you have not tapped the touch screen or taken any pictures).
When the camera is in Standby mode, the green LED ring on
the camera blinks slowly.

Suspend Mode

You can further conserve power by setting your camera to
suspend when not in use. In Suspend mode, the pocket
camera is off and does not use any power. When the camera is
in Suspend mode, the green LED ring on the camera is not lit,
and the shutter button on the pocket camera does not respond
when you press it. By default, your camera will not suspend;
you must set this option as described below.
To set the delay for Standby and Suspend modes
1. In Review mode, on the View menu, tap Options, and then
tap the Power tab.
2. Select the delay times for Standby and Suspend modes
from the drop-down lists.
44 hp pocket camera