HP iPAQ hx2000 Frequently Asked Questions Manual page 58

4. When the Map Loader screen appears, determine how
you want to load maps and follow the instructions to load
whichever maps you choose.
Note:
Be sure you have enough memory available to load the
maps you choose. You can monitor available memory by
referring to the Available Memory and Selected Size boxes.
Refer to "How Do I Manage Available Storage?"
document for information on increasing memory availability.
5. Click Generate Map to transfer the map to your Pocket PC.
When prompted, insert Disc 2 into your CD drive and click
OK.
6. Be sure the GPS receiver is charged and the power is on. To
verify that the receiver is charged, plug it in. If the yellow
LED is on, it is still charging. If it goes out, the charge is
complete. To verify that the power is on, look for the flashing
GPS or Bluetooth LED.
7. Turn Bluetooth on by tapping the iPAQ Wireless icon in the
Command bar > Bluetooth button on the iPAQ Wireless
screen > OK.
8. Tap Start > Programs > iPAQ Navigation System > OK.
earlier in this
54