Table of Contents
Advertisement
INSTALLATION & SETUP
Interval Data
This function shows the user the vender accounting data since the last time of the last counter reset. This data
can be reset either from the menu or by DEX interrogation.
Press Select Button 1: Shows the total cash collected since the last counter reset
Press Select Button 2: Shows the total number of vends since the last counter reset.
Press Select Button 3: Shows the total number of vends by selection since the last counter reset Each selection
Press Select Button 4: This button zeros the resettable data described above. Hold select button "4" for 5
Set Price
This function is used to set the price of each selection. When a select button is pressed, the price for that
selection will be displayed. If the button is held in, the price will increment or decrement. To change from
increment to decrement, release the select button and press it again. To set all selections for the same price: set
the desired vend price on select #1, then simultaneously press and hold buttons 3 & 4 for 5 seconds the display
will show "Single Price Set", this will change the vend price of all selections, both primary and secondary, to the
price programmed to button #1.
Note:
The HVV multi-pricing capability allows you to set all the selections to any price in the range of $0.00 to
$99.95.
Press & hold select buttons 1&2 simultaneously to move to the next item on the menu.
Cash Settings
Fill Coin Mech:
This function is used to count coins loaded in the top (separator) of the coin mech. Press select #1 will
enter Fill Coin Mech. Press button #1 again will display a "0". Insert coins in the top (separator) of the coin
mech. The total value of the coins will be displayed and will counted in the DEX audit data, so the
controller knows exactly how much change is in the coin mech.
Press & hold buttons 1&2 simultaneously to move to the next item on the menu.
Dump Coin Mech:
This function is used to dump coins from the coin mechanism. Press select button #1 to enter mode and
the lowest coin value dispensable will show on the display. Press and hold select buttons 1&2
simultaneously to scroll through the different coin values available to dump coins. Press and hold button
#1 to dump the coins whose value is shown on the display. Press and hold select buttons 1&2
simultaneously until "Return" shows on the display. Press button #1 will return to "Dump Coin Mech".
Coin Rules:
This condition is used to allow the exact change condition to be turned on or off. When off, the controller
will not go in the exact change condition. This will allow bills or coins to be accepted regardless of the
tube level status of the coin mech. When turned on, the controller will set the exact change condition
based on the ability to pay back non-refundable currency (ie. Coins, paper). To show current condition
press select button 1. Press and hold select button 1 to toggle "Coin Rules" on and off.
automatically scrolls across the display.
seconds, "the display will go blank" and "Counters Reset" will be displayed. At this time,
all resettable data will return to "0".
8
Hide quick links:
Advertisement
Table of Contents
