Table of Contents
Advertisement
INSTALLATION & SETUP
The controller has two modes of operation:
NORMAL and SERVICE.
NORMAL MODE:
In Normal Mode, on power up display will show software installed in
vender, then change to Ice Cold Pepsi message, Sold Out, Credit
Value, or decimal point. If decimal is flashing, this indicates an
error or problem recognized in the vender.
inserted, the display indicates the total amount of the deposit. The
select buttons are used to select the product. In normal mode you
may access an external menu for reading historical sales total,
product total, product total by selection, and sales by price totals.
SERVICE MODE:
The Service Mode is entered when the vender door is open and the service
switch is pressed. The display will show a list of error codes for errors that have occurred since the door was last
opened. "Jammed Column #" is a vend mechanism jammed,
"Refrigeration" is a refrigeration or temp sensor problem, and "Lock Error" is a door switch open problem. To
acknowledge an error, press any select button, at this time you will enter the menu. The display will show
"Historical Data" at this time. Some of the menu items have sub-menus.
To move through the menus and sub-menus follow these instructions. To:
MOVE THROUGH MENU:
ENTER SUB-MENU:
EXIT SUB-MENU:
EXIT SERVICE MODE:
Closing the inner door or a five-minute inactivity time-out will exit the service mode.
Historical Data
This function shows the user the vender accounting over the life of the vender. Use the following select buttons to
view the total sales in dollars, total number of vends and the total number of vends for each selection.
Press Select Button 1: Shows the historical total cash sales for the life of the vender.
Press Select Button 2: Shows the historical total number of vends.
Press Select Button 3: Shows the historical number of vends by selection. Each selection automatically scrolls
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
PEPSI-COLA HVV
PROGRAMMING METHOD
Press select buttons 1 & 2 simultaneously to scroll down through the menu.
While scrolling down through menu, release, press select buttons 1 & 2
simultaneously to scroll up through menu.
Press and hold select button 1 to enter a sub-menu.
With "Return" on display, press and hold select button 1 to exit a sub-
menu.
FRONT PANEL PROGRAMMING
SERVICE MENU
across the display.
June 2001
When money is
"Select Switch #" is a select switch problem,
Side-By-Side
7
Hide quick links:
Advertisement
Table of Contents
