TROUBLESHOOTING FLOWCHARTS
These charts are intended to isolate and correct most problems you might encounter.
All coins are rejected.
Main Power
Disconnected.
Blown Fuse
Check Prices
Loose connection.
Jammed coin
mechanism.
Weak springs on
changer gate.
Acceptor gate partially
open.
Dirty / faulty coin sensor.
Incompatible coin
mechanism.
Defective coin
mechanism.
HT2 defective Universal
controller board or
HT3 Control Board.
ALL COINS ARE REJECTED
Apply power
Check fuses and
replace if
necessary.
Reset Price
Check cable at
coin mech and
controller board.
Clear coins.
Replace spring.
Clean and reset
acceptor gate.
Clean / Replace.
Replace with
approved coin
mechanism.
Check mech in
diagnostics
"Coin Mech".
Replace.
Check reject
button / lever for
proper
adjustment.
Replace with
known good
coin mechanism.
28