TROUBLESHOOTING
Selection will not vend.
Vend price set
incorrectly.
Insufficient credit.
No product in column.
Product and shimming
mis-matched.
Blown motor power fuse
(F2)
Check select switch in
diagnostics.
Select switch not
responding.
Loose connections.
Defective Vend Motor.
Defective harness.
Defective controller
board.
SELECTION WILL NOT VEND
Check price and
reset if
necessary.
Check price,
ensure credit is
equal to or
greater.
Fill column with product.
Check sold-out switch in diagnostics.
Replace if necessary.
Check shimming
setup.
Replace fuse
(6.0 Amp Fast Blo)
Check select switch
in diagnostics.
Replace if
necessary.
Check harness connections at
HT2 Universal and Machine
controller and HT3 control boards,
door / cabinet interface, and vend
Use "Motors" test to
check vend motor.
Replace if necessary.
Replace harness.
Replace.
motor.
31