Related Manuals for Parker DUAL FBO Series
Summary of Contents for Parker DUAL FBO Series
- Page 1 Parker Hannifin Filtration Group Racor Division DUAL FBO OPERATION AND MAINTENANCE INSTRUCTIONS SPARE PARTS DFBO-10-IN/DFBO-14-IN DFBO-14-MA...
-
Page 2: Table Of Contents
8.4. Malfunctions ............................17 9. MAINTENANCE OF THE SYSTEM................18 9.1. Replacing the filter elements ........................ 19 9.2. Replacing the filter spool sealing ......................20 10. SPARE PARTS ......................21 11. MANUFACTURER’S CONTACT INFORMATION ............23 © Parker Hannifin Racor Division... -
Page 3: Preface
These operating and maintenance instructions shall be complemented with relevant instructions set forth in local acts and statutes, and in requirements by local authorities. © Parker Hannifin Racor Division... -
Page 4: To The User
• Any parts replaced for maintenance or prepare purposes shall be original Parker Hannifin spare parts. • The manufacturer reserves the right to change the device or its operation and maintenance instructions without prior notice. -
Page 5: Safety Instructions
Incorrect use or maintenance of the device may cause danger to environment or the device itself READ OPERATION AND MAINTENANCE INSTRUCTIONS Prior to operating the device you shall read and fully understand the operation and maintenance instructions. © Parker Hannifin Racor Division... -
Page 6: Operator Safety Instructions
Danger of slipping. Keep the maintenance area clean of oils or other substances that may cause slipping. Poisoning or allergy risk. None of the fluids used in the device may be swallowed. Avoid skin contact with fluid. © Parker Hannifin Racor Division... -
Page 7: Technical Specifications
EN-GJS-400-15 / S355J0 / CR03 for all pressurized components Weight: 40 kg (90#) Volume: 20 liters (5.3 gal) Dimensions (WxHxD): 550 mm, 690 mm, 225 mm (22”, 27”, 9.0”) 5-10-25 μm filter / separator Filtering element: © Parker Hannifin Racor Division... -
Page 8: Main Components
73309 031912 5. MAIN COMPONENTS Filter housing Filter bowl NOTE: WATER SENSORS Clamp Filter element ARE OPTIONAL Valve spool Spool locator Spool handle Venting valve Air exhaust port Filling connection Water / oil draining valve © Parker Hannifin Racor Division... -
Page 9: Description Of Operation
The oil (red arrows) exits the filter through the outlet connection. The water (blue arrows) trickles from the surface of the separation element to the bottom of the filter bowl. © Parker Hannifin Racor Division... -
Page 10: Installing And Commissioning
• Supporting bracket or piping may not cause any stresses on the filter (twisting, pulling, etc.). • Sufficient space is available for installation work (Cf. Installation Drawing). • Uncoupled accessories like sensors, gauges, etc. are properly connected • All screws and connections are properly tightened. © Parker Hannifin Racor Division... -
Page 11: Installation Drawings
Duplex Fuel Filter & Separator 11(23) DUAL FBO Operation and Maintenance Instructions 73309 031912 7.3. Installation drawings © Parker Hannifin Racor Division... - Page 12 12(23) Duplex Fuel Filter / Separator DUAL FBO Operation and Maintenance Instructions 73309 031912 © Parker Hannifin Racor Division...
-
Page 13: Use Of System
IMPORTANT NOTICE! Pressure measuring connections in the filter housing above the spool ARE NOT WORKING in middle position. If the middle position will be used, filter pressure drop indication have to be carried out by the means of external indication devices. © Parker Hannifin Racor Division... -
Page 14: Changing The Filtering / Idling Chamber
8.3. Changing the filtering / idling chamber. Spool locator 1. Chamber B is filtrating according the text in front of the handle. Pull the spool locator knob to release the spool for turning. Start turning the spool slowly using the handle. © Parker Hannifin Racor Division... - Page 15 15(23) DUAL FBO Operation and Maintenance Instructions 73309 031912 2. After ¼ rotation (90°) the spool may stop in the middle position. Release the spool again by pulling the knob and keep turning the spool. © Parker Hannifin Racor Division...
- Page 16 Operation and Maintenance Instructions 73309 031912 3. When the spool has been fully turned (180°), make sure that the spool locator locks the valve spool. Chamber A is filtrating according the marking in front of the spool. © Parker Hannifin Racor Division...
-
Page 17: Malfunctions
> Make sure the system pressure is within specified limits Excessive pressure drop — > Make sure the filters have been replaced with a correct procedure and on schedule —— > Replace the filter elements See maintenance instructions on chapter 9. © Parker Hannifin Racor Division... -
Page 18: Maintenance Of The System
• Before any connections are opened, the system must be made pressureless. • Clean all connections and components in conjunction with maintenance work. • Check all connections for tightness. © Parker Hannifin Racor Division... -
Page 19: Replacing The Filter Elements
Before opening the filtration chamber make sure of the system is pressureless. Filter elements have to be replaced by using original Parker Hannifin filter elements. 1. Make sure that the spool is position that the chamber to be serviced is idling. Turn the spool if needed. -
Page 20: Replacing The Filter Spool Sealing
3. Remove spool locator from handle. It is not necessary to detach the handle. 4. Remove spool holder(s). 5. Remove the spool with sealing. 6. Change the sealing. 7. Assemble the filter in reverse order. © Parker Hannifin Racor Division... -
Page 21: Spare Parts
DUAL FBO Operation and Maintenance Instructions 73309 031912 11. MANUFACTURER’S CONTACT INFORMATION: Parker Hannifin Filtration Group Racor Division Mail address 805 West Street Holly Springs, MS 38635 United States of America Telephone 800-344-3286 (USA) www.parker.com/racor © Parker Hannifin Racor Division...