Remote Mode - Siemens TP700 Comfort Operating Instructions Manual

REMOTE MODE

Speed is set via analogue input terminals. This signal should be 0v to 10v only as
scales linearly from 0 to the maximum speed of the machine.
0V = Min Caterpillar speed; 10V = Max Caterpillar Speed
Caterpillar belt speed (White Display):
Displays the actual speed of the caterpillar.
Remote input signal (White Display):
Displays the voltage of the external control signal.
For more technical support, please go to our website:
www.gillardcutting.com/technical
10