Siemens TP700 Comfort Operating Instructions Manual page 27

Touch-sreen operator control panel

Hide thumbs Also See for TP700 Comfort:

Table of Contents

Batch Stop (option):

The machine will sound an audible alarm when a batch has been completed. The

administrator can choose if this stops the machine or the cutting cycle continues.

When on is selected, the machine will stop when the batch is completed. The

following screen will be displayed when the machine has completed a batch:

Batch Total Stop (option):

The machine will sound an audible alarm when a total number of batches have

been completed. The administrator can choose if this stops the machine or the

cutting cycle continues.

E.g. The batch size is 1000 units and batch total is 5 batches. The machine will

sound an audible alarm and/or stops after 1000 x 5 = 5000 cuts.

When on is selected the machine will stop when the batch total is completed.

For more technical support, please go to our website:

www.gillardcutting.com/technical

Table of Contents