ECOVACS DEEBOT T9 AIVI Instruction Manual page 5

To disable Wi-Fi module on DEEBOT, power the
robot ON.
Place the robot on the Docking Station making
sure the Charging Contacts on DEEBOT and the
Docking Station Pins make a connection.
Press and hold the AUTO Mode Button on the
robot for 20 seconds until DEEBOT emits 3
beeps.
To enable Wi-Fi module on DEEBOT, power the
robot OFF and then power ON. The Wi- Fi module
is turned on when DEEBOT is restarted.
Class II
Short-circuit-proof safety isolating
transformer
Switch mode power supply
For indoor use only
Direct current
Alternating current
For EU Countries
For EU Declaration of Conformity information, visit
https://www.ecovacs.com/global/compliance .
Correct Disposal of this Product
This marking indicates that this product should
not be disposed of with other household waste
throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To
recycle your used device, please use the return and
collection systems or contact the retailer where the
product was purchased. They can safely recycle this
product.
The remote surveillance is for the absolute private use
of non-public, private owned places for the pure self-
protection and single control intended only. Please be
aware of the local data protection based legal obligations
in case of use. No surveillance of public places, especially
with clandestine intent and/or on the part of the employer
without justified reasons. Such not justified use is in the
risk and responsibility of the user only.
5
EN