Table of Contents
Advertisement
2
Pause
Note:
The robot's Control Panel stops glowing after the robot is paused for a
few minutes. Press the AUTO Mode Button on DEEBOT to wake up the robot.
3
Return to Charge
Pressing
for 3 seconds to send DEEBOT back to the Docking Station.
10
EN
OZMO Pro Oscillating Mopping
System
Note:
1.Install OZMO Pro Oscillating Mopping System for floor scrubbing.
2.With electric oscillating mopping up to 480 times per minute, OZMO Pro is
applicable for areas of highly concentrated dirt or dust.
3.Before installing OZMO Pro, please make sure the contacts are thoroughly dry.
4.Please avoid using OZMO Pro on the carpet.
1
Remove the Substitute Module
2
Fill Up OZMO Pro
* To prolong the service life of OZMO Pro, it is recommended to use purified
water or softened water.
* Do not soak OZMO Pro in water.
Advertisement
Table of Contents
